2-component polyurethane water dispersion. Floor paint. Increased strength. For interior work.
 Type of material:
 Floor paint is an environmentally friendly, water-borne semi-gloss floor paint with high abrasion resistance and hiding power. Odorless, non-toxic, tinted in a wide range of colors, easy to apply and dries quickly, multiple repainting is possible.
 Structure:
 Component A:   Water, polyurethane-acrylate synthetic dispersion, additives, preservative.
 Component B: modifying additives, polyols, water.
 Color:
 white, tinted
 Gloss degree
 semi-glossy
 Density:
 OK. 1.2 g / cm3
 Application:
 The paint is applied with a roller, with a short bristle, synthetic brush, spray.
 Base:
 The concrete surface must be dry and cured for at least 4 weeks. The relative humidity of the concrete should be no higher than 6%. Do not apply to wet and non-absorbent surfaces.
 Application:
 Water-borne acrylic-polyurethane paint intended for painting concrete floors indoors, which are exposed to moderate mechanical (soft tires) and chemical attack (oil, alkali). for example: industrial workshops, retail and warehouse premises, staircases, balconies, basements, etc. Well suited for repairing floors previously treated with alkyd paints or varnishes.
 Base:
 The concrete surface must be dry and cured for at least 4 weeks. The relative humidity of the concrete should be no higher than 6%. Do not apply to wet and non-absorbent surfaces.
 Preliminary preparation:
 Remove cement glue with a grinder. Remove sanding dust. Prime with Kaizer's Betogrund primer to reduce absorbency and improve adhesion.
 Material preparation:
 mix components A and B in a ratio of 100: 15 by weight. For example: component A - 8.5kg + component B -1.5kg. TOTAL you get: 10kg of finished paint for application. Or, accordingly, when mixing component A - 17kg + component B - 3kg, you get: 20kg of finished paint for application. It is recommended to use a power tool for mixing the components. Let the mixed composition stand for 20 minutes, then apply.
 ATTENTION: after mixing the components, the paint life is 4 hours!
 Application:
 The paint is applied using a roller, with a short bristle, synthetic brush, spray, not earlier than 6 hours and not later than 24 hours after the primer has dried.
 Consumption:
 varies with application method and layer thickness. Approx .: 350gr / m², for 2 layers.
 Drying time:
 Kaizer BETOLUX paint dries from dust within one hour, for foot traffic and application of the 2nd layer - after 8 hours, for full loads - after 24 hours. Thus, priming and painting in 2-3 coats can be done within one working day.
 Kaizer's BETOLUX paint reaches its final hardness and durability in about two weeks.
 Application temperature:
 During priming and drying of the first layer, the temperature of the air, surface and material should be above +10 ºС, and the relative humidity below 80%.
 Cleaning of working tools:
 Immediately after use with water.
 Packing:
 Component A - 8.5kg, 17kg
 Component B - 1.5kg, 3kg
 Storage:
 Shelf life in unopened manufacturer's packaging is 12 months.
 Do not freeze!
 Security measures:
 Keep out of the reach of children. Do not inhale vapors when spraying. Ventilate well during and after work. In case of contact with eyes or skin, rinse immediately with plenty of water. Do not empty into drains, waterways or soil.
 Disposal:
 According to local regulations.
 Precautions:
 Keep out of reach of children. In case of contact with eyes, flush with plenty of water. Do not empty into drains.