"Plastik Latex" by "Kaizer" Silky-glossy dispersion paint for exterior and interior use. Resistant to abrasion. Super washable.
 Technical description.
 Product information:
 Dispersion paint, special, facade
 «Plastik Latex» brand "Kaizer"
 Silky-gloss dispersion paint for exterior and interior usehe; ys [
 Abrasion resistant
 Super washable
 Type of material: For the formation of silky-glossy coatings resistant to abrasion in the external and internal sectors. On surfaces made of concrete, plaster and plaster, as well as lightweight building boards. Ideal for painting on fiberglass, coarse fiber and textured wallpaper.
 Color: White.
 Gloss degree: silky-glossy.
 Composition: Water, synthetic acrylic dispersion, titanium dioxide, fillers, additives, preservative.
 Density: Approximately 1.3 g / cm3.
 Application: By brush, roller, airless spray (nozzle 0.026 to 0.031 inches or 0.66 to 0.79 mm; pressure 6-8 bar, spray angle 40 - 80 °).
 Properties: Resistant to repeated abrasion and washing, durable. Does not contain solvents. Convenient in processing, has a high hiding power, is capable of good adhesion and adhesion. Very economical. Forms durable silky-glossy surfaces, lightfast.
 Substrate preparation: The paint can be applied to all solid substrates, they must be clean, dry and sound. Old glue whitewash must be completely removed. Prime fresh cement-based plaster and repaired areas. Treat intensively moisture-absorbing surfaces with Kaizer Putzgrundharter 1: 4 primer, Kaizer brand gypsum plaster with Wasserstop 1:10 primer. Observe the appropriate rules for thinning and applying primers.
 Painting procedure: Stir the paint well before application. Apply the paint in two coats without thinning. When painting, make sure that the material is applied evenly.
 Tinting: Machine tinting, or manual tinting with KaizerMix water-dispersive color tint from Kaizer.
 Cleaning of instruments: Immediately after use, rinse with water.
 Storage: Store in a cool, dry, frost-free place. Store opened and incompletely used containers tightly closed. Shelf life in the original packaging of the manufacturer is 12 months.
 Packing: 1kg, 5kg, 10kg, 20kg
 Consumption: 130 g of paint is sufficient for approx. 1 m2 in one coat on a smooth surface, variations may occur depending on the quality of the substrate. On rough surfaces, fiberglass, respectively, more, approximately 180-200 g / m2.
 The most reliable method of accurately establishing the flow rate is a test painting.
 Drying time: At room temperature + 20 ° C, re-coating is possible on the same day. At cool temperatures, the drying time increases accordingly.
 Processing temperature: Minimum + 5 ° C for substrate and atmosphere during application and during drying.
 Disposal: According to local regulations.
 Precautions: Keep out of reach of children.
 In case of contact with eyes, flush with plenty of water.
 Do not empty into drains.
 The data and recommendations provided are based on our many years of experience and knowledge and correspond to the use of the latest technology and technology, however, they are not a complete guarantee for each specific case, since it depends on the quality of the substrate, processing and application.