Deep penetration primer, concentrate 1: 1. Strengthens the foundations. Reduces and levels the absorbency. Does not contain solvents. For interior and exterior use.
 Technical description:
 Type of material:
 Diffusible, vapor permeable, good setting, solvent free, alkali resistant, deep penetrating primer with low odor. Weather resistant, good permeability.
 Structure:
 Water, acrylic dispersion, additives, preservative.
 Color:
 White, when dry - colorless
 Density:
 Approximately 1.0 g / cm3.
 Application:
 Brush; roller; airless spray (nozzle 0.021 to 0.026 inches or 0.523 to 0.66 mm; pressure 6-8 atm; spray angle 40-80 °).
 Application:
 For dedusting and leveling the absorbency of heavily or to varying degrees of absorbent substrates, such as: gypsum plasterboards, gypsum plasters, specially designed for aerated concrete surfaces, hard fiber, pressed bases indoors and outdoors and for unpainted plastered surfaces, for bonding easily crumbling surfaces easily chalky old coatings to be plastered.
 Substrate preparation:
 Substrates must be strong, dry, clean and capable of bearing the load.
 Compatibility:
 Miscible with all synthetic based dispersion paints and coatings.
 Application procedure:
 Carefully remove fragile coatings. Normally absorbent substrates are treated with Meister Gut 1: 1 Primer, diluted 1: 1 with water. Treat highly absorbent substrates with undiluted Meister Gut 1: 1 Primer, if necessary in 2 coats. Priming work is carried out with a brush or a brush, apply the primer abundantly. When working indoors, preliminary priming of the previously painted surface is not necessary.
 Consumption:
 Smooth plastered surfaces: approx. 100 ml / m2 Medium granulation plaster: approx. 150 ml / m2 Coarse plaster: approx. 200 ml / m2 For the most accurate calculation of the consumption in each specific case, it is recommended to carry out a trial priming on site.
 Cleaning tools:
 Wash tools immediately after work with water and household detergents.
 Storage:
 Store in a cool, dry, frost-free place. Close opened packaging tightly. Shelf life in the original packaging of the manufacturer is 12 months.
 Packing:
 5 l, 10 l
 Drying time:
 At approx. +20 ° C Further processing is possible on the same day. Drying times are correspondingly longer at cooler temperatures.
 Processing temperature:
 + 5 ° C minimum for substrate and atmosphere during processing and drying.
 Precautions:
 Keep out of the reach of children. Do not inhale vapors when spraying. Ventilate well during and after handling the product. In case of contact with eyes or skin, rinse immediately with plenty of water. Do not empty into drains, waterways or soil.
 Disposal:
 According to local regulations.