top of page

Pigmented concrete primer. For interior work. Does not contain solvent.

Technical description:

Product type:

A special pigmented primer that forms a roughened surface on smooth, dense substrates to improve the application and adhesion of decorative plasters.




Water, synthetic acrylic dispersion, quartz sand, additives, preservative.


1.36 g / cm3


By brush, roller, spray, airless spray.


For pre-treatment of dense, smooth, non-absorbent substrates during interior work - monolithic concrete, massive concrete ceilings, concrete blocks, before applying gypsum or gypsum-lime plasters, as well as before applying dry plaster. "Betonkontakt" is a reliable "bridge" between the base and the material applied to it.


Acrylic primer with quartz sand additives, highly resistant to alkalis. Solvent free, improves adhesion. Forms a vapor-permeable coating, i.e. does not isolate water vapor indoors, the surface "breathes". The product is environmentally friendly, diluted with water, odorless.


Must be strong, dry, free of formwork material and processing agents. Remove fragile parts. The temperature of the substrate and the air during processing and until the final drying of the primer must not be lower than + 5 ° C.

Operating procedure:

"Betonkontakt" is ready to use and is applied without thinning with a roller with a tsigay "coat" or by machine spraying. When spraying, the primer can be thinned with a small amount of water (max. 1 l of water for 20 kg of primer). Stir well before use. Apply the plaster to the surface if the primer is no longer sticky and is completely dry. After the "Betonkontakt" primer has hardened, it is necessary to start applying the plaster as soon as possible, because of the possible construction dust that settles on the primer.


Do not mix the "Betonkontakt" primer with other materials, as this can greatly affect its properties.

Cleaning tools:

Rinse with water immediately after completion of work. It is best to remove splashes while still fresh with water. Removal of dried primer is possible only mechanically.


OK. 250-300 g / m2. For a more accurate determination of the flow rate, it is recommended to make a test painting on site.


Store in a cool, dry, frost-protected place for approx. 12 months. Keep away from direct sunlight and heat.


10kg, 20kg.

Drying time:

Min. 24 hours at + 20 ° C and 65% humidity. In colder and wetter weather, the drying time is correspondingly longer.

Processing temperature:

+ 5 ° C minimum for substrate and atmosphere during application and drying .


Keep out of the reach of children. Do not inhale vapors when spraying. Ventilate well during and after handling the product. In case of contact with eyes or skin, rinse immediately with plenty of water. Do not empty into drains, waterways or soil.


According to local regulations.

Smooth concrete primer - Budjet concretecontact

10 Kilograms
    Логотип 110.png

      Казахстанский лакокрасочный завод "KAIZER"  

      Смотреть адреса магазинов "KAIZER" по Казахстану

             +7 (727) 347-08-53 

             +7 (701) 952-64-89.

    bottom of page