Ready to eat. Highly elastic. Waterproof. Seals the surface. Suitable for waterproofing warm floors. Dries quickly. Does not contain solvents. Simple and economical to use. Easy to apply to the substrate. It is not toxic. Has a neutral odor. For interior work. Environmentally friendly product.
 Usage technology:
 1 layer - Deep penetration primer-impregnation
 2nd layer - Waterproofing mastic
 Technical description:
 Type of material:
 Highly elastic, waterproofing acrylic based mastic for interior use.
 Structure:
 copolymer acrylic dispersion, marble filler, talc, water repellent, functional additives, water.
 Color:
 Blue, white
 Application:
 Roller, brush, spatula.
 Application:
 It is used for sealing walls and floors in bathrooms, showers, toilets, laundries. For waterproofing warm and self-leveling floors. It can be applied before laying ceramic tiles, or on walls, before painting with dispersion paints. It is used for waterproofing roofs under the roof.
 Do not use on surfaces exposed to constant water, such as swimming pools, for waterproofing foundations.
 Reasons:
 Cement, cement-sand, anhydrite, gypsum screed floors. The foundations must be load-bearing, i.e. strong, even, dry for a long time, dust-free and fat-free. Uneven concrete, masonry and cement screed must be leveled before applying the mastic. The surfaces must be primed with Kaizer Putzgrundharter 1: 4.
 Operating procedure:
 Stir the mastic thoroughly before use, apply with a short-haired roller, brush, so that no unpainted areas remain. After 2-4 hours a second layer of mastic can be applied. After two layers of mastic have dried, you can stick on ceramic tiles or paint the surface with dispersion paints that are resistant to washing. Plastering is possible after the surface is completely dry.
 Cleaning tools:
 Wash immediately after use with water and detergents.
 Consumption:
 about 0.5-0.6 kg / m2 in two coats, depending on the substrate and the thickness of the application. The most reliable method for accurately setting the flow rate is a test coating.
 Storage:
 Not lower than +5 ° C
 Packing:
 1 kg, 5 kg, 10 kg
 Drying time:
 At an air temperature of + 20 ° C and a relative humidity of 65-75%: 2-4 hours - resistance to touch (you can apply a second layer). Completely dry after 24 hours (further materials can be applied).
 Processing temperature:
 Not lower than +15 ° C for the substrate and +18 ° C in the atmosphere during application.
 Disposal:
 According to local regulations.
 Precautions:
 Keep out of reach of children. In case of contact with eyes, flush with plenty of water. Do not empty into drains.