Deep penetrating acrylic primer, concentrate 1: 4. Strengthens the foundations. Reduces and levels the absorbency. Does not contain solvents. For interior and exterior use.
 Technical description:
 Product type:
 Diffusible, vapor permeable, good setting, solvent free, alkali resistant, deep penetrating primer with low odor. Weather resistant, good permeability.
 Color:
 White, when dry - colorless
 Structure:
 Water, synthetic acrylic dispersion, additives, preservative.
 Density:
 Approximately 1.0 g / cm3.
 Application:
 Brush; roller; airless spray (nozzle 0.021 to 0.026 inches or 0.523 to 0.66 mm; pressure 6-8 atm; spray angle 40-80 °).
 Application:
 For dedusting and leveling the absorbency of strongly or to varying degrees of absorbent substrates, such as gypsum plasterboards, gypsum plasters. Specially designed for aerated concrete surfaces, hard fiber, pressed substrates indoors and outdoors. For unpainted plastered surfaces, bonding easily crumbled surfaces to be plastered, lightly caked old coatings.
 Properties:
 Special acrylic-based vapor-permeable primer for priming any ready-made and gypsum plasters, fiber cement, concrete. Prevents the formation of cracks, plaster shedding. The Kaizer brand Putzgrundharter primer imparts good adhesion to the substrate for subsequent painting and plastering with synthetic or mineral plasters, without disturbing the vapor permeability of previous layers, and evens out the absorbency of the substrate (eg wood, hard fiber, pressed and other plywood) and outside, as well as unpainted plastered surfaces.
 Substrate preparation:
 Substrates must be strong, dry, clean and capable of bearing the load, professionally prepared if necessary.
 Compatibility:
 Miscible with all synthetic based dispersion paints and coatings.
 Application procedure:
 Carefully remove fragile coatings. Normally absorbent substrates are primed with the Kaizer brand Putzgrundharter, diluted 1: 5 or 1: 4 with water. For highly absorbent substrates, apply the Kaizer brand Putzgrundharter primer diluted with water in a ratio of 1: 2, or 1: 3, if necessary in 2 coats wet on wet. Priming work is carried out with a brush or a brush, apply the primer abundantly. When working indoors, preliminary priming of the previously painted surface is not necessary.
 Consumption:
 Smooth plastered surfaces: approx. 100 ml / m2, Medium granulation plaster: approx. 150 ml / m2, Coarse plaster: approx. 200 ml / m2
 For the most accurate calculation of the consumption in each specific case, it is recommended to carry out a trial priming at the facility.
 Coloring:
 In order to avoid disturbing the special qualities of the soil, it is allowed to tint with the "Kaizer" dye.
 Cleaning tools:
 Wash tools immediately after work with water and household detergents.
 Storage:
 Store in a cool, dry, frost-free place. Close opened packaging tightly. Shelf life in the original packaging of the manufacturer is 12 months.
 Packing:
 1 l, 5 l, 10 l
 Drying time:
 At approx. +20 ° C Further processing is possible on the same day. Drying times are correspondingly longer at cooler temperatures.
 Processing temperature:
 + 5 ° C minimum for substrate and atmosphere during processing and drying.
 Precautions:
 Keep out of the reach of children. Do not inhale vapors when spraying. Ventilate well during and after handling the product. In case of contact with eyes or skin, rinse immediately with plenty of water. Do not empty into drains, waterways or soil.
 Disposal:
 According to local regulations.